Field Service Ver. 2.0 Mar. 2006
17. Jig Soft
213
bizhub C250P
Adjustment / Setting
17.2 How to display the Jig Software
NOTE
• Do not reveal the displaying method of the Jig software to the people except those
who are concerned.
<Procedure>
1.
Connect the crossing cable to the printer and PC.
2.
Turn the PC Power ON.
3.
Turn the Printer Power ON while pressing the Menu/Select key on the control Panel.
4.
Keep pressing the Menu/Select key until the LED turns OFF on the control Panel.
5.
Check to make sure that the “Trouble Reset” will be displayed on the control Panel after
LED turns OFF.
6.
Start the Jig software and check to make sure the Start-up Dialog will be displayed.
7.
Click the OK key in the dialogue.
8.
Check to make sure that the Start screen will be displayed on the PC.
9.
Check to make sure that the Start screen will change to the Panel screen.
10.
Click the Utility key.
11.
Click the Details key.
12.
Click the keys below.
STOP
→
0
→
0
→
STOP
→
0
→
1
13.
Service mode will be displayed.
<How to exit>
• Select Exit which is available from File.
4037F3E117DA
File
Utility key
STOP key
bizhub_C250P_Total.book 213 ページ ２００６年３月２７日 月曜日 午前８時２８分
