Konica Minolta 7115F, Instruction Manual

Page: 95 / 327

Basic Copy Operations 4
Konica 7115F/7118F 4-21
4.5 Specifying a Zoom Setting
By specifying a zoom ratio, the copy can be enlarged or reduced.
Zoom Settings
To make copies using the AMS setting
Note)
✔ The Automatic document Feeder (optional) is needed for copying with
the “AMS” function.
1
Load the document to be copied.
❍ Refer to “Loading the Document” on page 4-1.
2
Press the [APS/AMS] key until the
“AMS” function is selected.
❍ Check that “AUTO” appears in
the top line of the screen.
“Zoom” setting Description
Full size Copies are made at the same size as the document (
×
1.00).
AMS The most appropriate zoom ratio is automatically selected based
on the size of the document loaded and the specified paper size.
Preset zoom ratios The following common zoom ratios for copying from various
standard document sizes to standard paper sizes are available.
×
0.50
×
0.70 (A3 A4, B4 B5)
×
0.81 (B4 A4, B5 A5)
×
1.15 (B4 A3, B5 A4)
×
1.41 (A4 A3, B5 B4)
×
2.00
Zoom ratios selected
using the up and down
Zoom keys Using the [ ] and [ ] keys, the zoom ratio can be adjusted
(increased or reduced) in 0.01 increments.
A zoom ratio between
×
0.50 and
×
2.00 can be set.
“X/Y Zoom” function Copies can be made using different scaling proportions for the
vertical and horizontal directions.
Using the [
] and [ ] keys, the zoom ratio can be adjusted
(increased or reduced) in 0.01 increments.
The vertical and horizontal zoom ratios can be set between
×
0.50
and
×
1.00.