Konica Minolta 7115F, Instruction Manual

Page: 145 / 327

Fax Transmission/Reception Methods 7
Konica 7115F/7118F 7-5
5
Specify the fax number of the recipient.
Repeat the appropriate operations described below until all recipients
have been specified.
❍ When using the one-touch dial
keys:
Press the one-touch dial key
programmed with the desired
fax number.
Press the [YES] key, and then
specify the next recipient.
❍
When using the speed dial
numbers:
Press the [SPEED DIAL] key,
and then use the KEYPAD to
enter the 3-digit speed dial
number programmed with the
desired fax number.
Press the [YES] key, and then
specify the next recipient.
❍ When using group dialing:
Press the one-touch dial key programmed with the desired group
of fax numbers.
Press the [YES] key, and then specify the next recipient.
❍
When selecting from the tel book:
Press the [TEL BOOK] key, and then select either “LIST” or
“SEARCH” to select the desired fax number. (Refer to “To fax
using the tel book” on page 6-17.)
Press the [YES] key, and then specify the next recipient.
❍
When entering the number
using the KEYPAD:
Enter the fax number of the
recipient.
Press the [YES] key, and then
specify the next recipient.
? Has the wrong fax number been specified?
➜
Press the [NO] key to delete the current selection. (This is valid
only before the recipient is set by pressing the [YES] key.)
6
Press the [START] key.
A message appears, allowing you to select whether or not to check the
recipients.