Konica Minolta 7115F Instruction Manual Download Page 278

Page: 278 / 327

Error Messages

12-8

Konica 7115F/7118F

12.3

When the Message “PAPER JAM” Appears

If a paper misfeed occurs while copying or printing, the message shown
below appears, and copying and printing stops.

A message indicating the location of the paper misfeed appears in the
bottom line of the screen.

Follow the appropriate procedure described below to clear the misfed
paper.

To clear a paper misfeed in the main unit or 1st Tray

CAUTION

The area around the fusing unit is extremely hot.

➜

Touching any part other than the specified levers may result in burns.

CAUTION

There are hooks on the back of the guide plate.

➜

Touching any part other than the paper may result in injuries.

Message

Location of the paper misfeed

OPEN 1st SIDE COVER

Multiple Bypass Tray (p. 12-13)
Inside the main unit or 1st Tray (p. 12-8)

OPEN 2nd (3rd/4th/5th) SIDE
COVER

Paper Feed Cabinet (p. 12-12)

Summary of Contents for 7115F








































































































































































































































































































































Search results

Summary of Contents for 7115F

Reviews:

Brands by name

Popular brands

Konica Minolta 7115F, Instruction Manual

Search results

Summary of Contents for 7115F

Reviews:

Brands by name

Popular brands