Konica Minolta 7115F, Instruction Manual

Page: 129 / 327

Faxing 6
Konica 7115F/7118F 6-11
To fax by entering the fax number directly using the KEYPAD
1
Press the [FAX] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder.
3
If necessary, change the “Resolution” setting (p. 6-8).
4
Using the KEYPAD, enter the fax
number of the recipient.
❍
F codes (sub-address and SID)
can also be entered. Refer to
“Using F codes” on page 7-25.
? Have you entered the number correctly?
➜ The fax number can contain a maximum of 30 digits.
➜ The keys that can be used to enter the fax number are: the number
keys (0 through 9), , #, Space, and Pause
➜
If the [REDIAL/PAUSE] key is pressed while entering the fax
number, a 3-second pause is added. A pause appears as “P” in the
display.
➜
If you wish to change the fax number, press the [NO] key, and then
enter the correct number.
➜ If the machine is connected to a PBX line and the outside line
access number has been specified in the communication settings
(p. 3-38), enter “#” to dial the outside line access number
automatically.
5
Press the [START] key to begin scanning and sending the fax.