Konica Minolta 7115F, Instruction Manual

Page: 55 / 327

Before Making Copies or Faxing 3
Konica 7115F/7118F 3-25
Power Save Mode (Preheat Mode)
Instead of turning the machine OFF, it can be set to standby mode (Power
Save mode).
The Power Save mode can be turned on by pressing the [POWER SAVE]
key. In addition, if the machine is not used for a set length of time, it
automatically enters Power Save mode. The default length of time until
the machine enters Power Save mode is 15 min.
In order to conserve energy, the display in the Control Panel is turned off
during preheat mode.
Cancel Power Save mode by pressing any key in the Control Panel.
✎
Note
If the auto shut-off function activates while the machine is in Power
Save mode, the machine is automatically turned off.
✎
Tip
The length of time until the machine automatically enters Power Save
mode can be set between 1 min and 240 min.
For details, refer to “To set the “POWER SAVE MODE” (preheat
mode) function” on page 9-5.
Auto Shut-Off
In order to conserve energy, this machine can be set to automatically shut
off after a set length of time. As a default, the “AUTO SHUT OFF” function
is turned off.
✎
Tip
The length of time until the machine automatically shuts off can be set
between 15 min and 240 min. Refer to page 9-6.
Queued Copy Jobs
If a document is loaded and the [START] key is pressed after the machine
is turned on but before it is ready to begin copying, the machine queues
the job and automatically starts copying after it has finished warming up.