Konica Minolta 7115F, Instruction Manual

Page: 113 / 327

Advanced Copy Operations 5
Konica 7115F/7118F 5-11
Setting the “Erase” Function
To make copies using an “Erase” setting
1
Load the document to be copied.
❍ Refer to “Loading the Document” on page 4-1.
2
Press the [ERASE] key to light the
indicator for the desired “Erase”
setting.
? Do you know how large of an
area is erased?
➜ The width of the erased area for
the “Left”, “Top” and “Frame”
settings can be set between
5 mm and 20 mm, in 1 mm
increments. The default setting is
10 mm.
➜
The width of the erased area for
the “Fold” setting is fixed at
10 mm.
➜
The width of the erased area for the “Left”, “Top” and “Frame”
settings can be changed using the “ERASE SETTING” function in
the Initial Set mode (p. 9-36).
3
If necessary, specify any other copy settings.
4
Enter the number of copies to be made on the KEYPAD, and then
press the [START] key.