Konica Minolta 7115F, Instruction Manual

Page: 59 / 327

Before Making Copies or Faxing 3
Konica 7115F/7118F 3-29
Turning the Machine ON
After the machine is turned on, the indicator on the [START] key lights up
in orange and “PLEASE WAIT!” appears in the display while the machine
warms up.
At this time, a document can be loaded into the Automatic Document
Feeder and the [START] key pressed to queue the job. (p. 3-25)
Even though the [START] key is pressed, the copy operation does not
begin until the machine has finished warming up (after about 30 seconds
at a room temperature of 23°C (73.4°F)).
Default Settings
The settings that are automatically selected when the machine is turned
off or the [AUTO RESET] key is pressed are called the “default settings”.
These settings serve as a reference for all functions.
Copy mode
G Number of copies: 1
G Copy density: AUTO
G
Zoom ratio: Full size (
×
1.00)
G Paper source: APS (with the Automatic Document Feeder installed)
G
Output function: Non-sort
Fax mode
G Resolution: Normal
G Contrast: Medium
G
Transmission mode: Memory transmission
G Reception mode: Automatic reception
G
Transmission source: Within document
✎
Tip
The default settings can be customized using the functions in the Initial
Set mode (“9 Initial Set Mode – Copy Functions” and “10 Initial Set
Mode – Fax Functions”).