Konica Minolta 7115F, Instruction Manual

Page: 133 / 327

Faxing 6
Konica 7115F/7118F 6-15
To fax using program dialing
If one-touch dial keys have already been programmed with fax numbers
and a transmission/reception function (such as timer transmission or
polling reception), that function can be carried out by pressing just the
corresponding one-touch dial key.
For details on setting program dialing, refer to “Setting Up Program Dialing
(“PROGRAM DIAL” function)” on page 10-16.
1
Press the [FAX] key to enter Fax mode.
2
Load the document into the Automatic Document Feeder. (This step is
not necessary with polling reception.)
3
If necessary, change the “Resolution” setting (p. 6-8). (This step is not
necessary with polling reception.)
4
Press the one-touch dial key ([24]
through [27]) programmed with the
desired function.
The programmed function
automatically begins.
✎
Tip
If the wrong one-touch dial key has been pressed, press the [STOP]
key either while dialing or sending the fax to stop the operation.
To cancel a timer transmission, select “CANCEL RESERV.” from the
“FUNCTION” menu (p. 7-19).