Kipp & Zonen SOLYS Gear Drive, Instruction Manual

Page: 71 / 112

4.3 Web interface
The ‘Browser’ tab will allow you to show the SOLYS web page. When the buttom ‘show’ is clicked the SOLYS web page will appear in
your default browser.
The SOLYS comes up with a window for user name and password. Default settings are, username: user and password: solys
Note that in case of a direct connection, the Windows® computer needs a few minutes to assign itself an Automatic Private IP Address.
If it does not, verify that Automatic Private IP Address of the TCP/IP properties of the PC’s network connection is enabled.
The status TCP protocol is a subset of the serial communication described in the next chapter
The communication parameters are:
- TCP port 15001
- Number of connections 10
When the server has 10 socket connections and receives a new connection request it will accept the new connection and drop the
oldest connection. The oldest connection is determined on base of the ‘alive’ time. The ‘alive’ time is initially set to the connection
accept time and is updated when any character is received from the HOST.
In order to keep the connection alive at the application level, the HOST may send a character to the server regularly. However, this
is not mandatory.
The status TCP interface does not support commands or requests. The description of the messages is identical to the serial protocol.
The HOST application must be able to handle disconnection or shutdown of the connection by the server.
Tracking Status Instrument Status Configuration Browser
Web browser
Show SolysGD14003 in the default webbrowser Show
COM10
71