Kipp & Zonen SOLYS Gear Drive, Instruction Manual

Page: 69 / 112

4.2.7 Configuration
The ‘Configuration’ tab allows you to change the logging location. Select a location that has sufficient space. The default location
is: C:\SOLYS\Logging, but can be changed by clicking on the map icon on the right.
Default logging is on, but can be switched off with the check box. In case multiple SOLYS’s are connected a logging file is created
for each SOLYS. For Ethernet connection the file name shows the SOLYS name plus date (e.g.: LogInfo_Solys-
GD140003.26-02-2015.log). For COM port connection the file name shows the COM port plus date (e.g.: LogIn-
fo_COM10.26-02-2015.log).
For both connections this file contains the following information for every second:
2015-02-26 11:29:42,429 computer logging date and time:
- .status=1; Message type:
SolysGD140003; SOLYS (network) name:
2015/02/26; SOLYS, date
10:32:17; SOLYS, time
156.896621; Solar Azimuth angle
63.285995; Solar Zenith angle
156.896652; SOLYS axis azimuth angle
63.285976; SOLYS axis zenith angle
51.996799; Lattitude (degrees, North positive)
4.386190; Longitude (degrees, East positive)
999.40; Estimated air pressure in millibar, based on altitude
0x012; Status code
0x0001BA34; Instrument status
0x210B; Azimuth motor status
0x210B; Zenith motor status
0x4F69; Checksum
See Appendix E.2.3. for detailed explanation of the status codes.
Tracking Status Instrument Status Configuration Browser
Serial Setting
Logging
File location
Logging
C:\Solys\Logging
COM10
69