Kipp & Zonen SOLYS Gear Drive, Instruction Manual

Page: 105 / 112

D.4.9 Clear serial interface configuration
Description
The command ‘.clear ser0;’ will revert the serial interface configuration parameters to defaults.
Argument (none)
Example
Request
.clear ser0;
Response
.ok;
D.5 Miscellaneous commands
D.5.1 Clear suntracking configuration
Description
The command ‘.clear track;’ will revert all suntracking configuration parameters to defaults. The instrument will reset as a result
of this command. This command has the same effect as the ‘.reset cold’ command, see paragraph 0.
Argument (none)
Example
Request
.clear track;
Response
.ok;
D.5.2 Clear all configuration
Description
The command ‘.clear all;’ will revert user account, operational mode, network configuration, serial interface configuration and
suntracking configuration to defaults. The instrument will reset as a result of this command. The command combines ‘.clear
account;ip0;ser0;track;’.
Argument (none)
Example
Request
.clear all;
Response
.ok;
105