Kipp & Zonen SOLYS Gear Drive, Instruction Manual

Page: 29 / 112

3.3 Side mounting plate dimensions
When optional components or instruments need to be installed on both sides of the SOLYS, an additional side mounting plate is
required. The next illustration is the mechanical drawing of the side mounting plate that is included (1x) with the SOLYS. This
information is required to create mounting materials for optional components or instruments. This mounting plate is intended for
loads up to 25 kg. For the SOLYS Gear Drive a large side mounting plate is available for loads >25 kg and < 80 kg (see chapter 3.9).
Figure 3.3. Side mounting plate dimensions
50 50
27
±0.1
54
±0.1
4.3 ±0.1 x 9 ±0.2 x 90° (4x)
19
38
39
78
37
M5 (4x)
All dimensions in mm
15
29