Kipp & Zonen SOLYS Gear Drive, Instruction Manual

Page: 104 / 112

D.4.6 Show serial interface number of data bits
Description
The command: ‘.show ser0databits;’ will show the configured number of data bits.
Argument (none)
Example
Request:
.show ser0databits;
Response:
.ser0databits=8;
.ok;
D.4.7 Set serial interface number of stop bits
Description
The command: ‘.set ser0stopbits=<bits>;’ will set the number of stop bits.
Argument (1)
Description number of stop bits
Type integer
Range 1 or 2
Default value 1
Example
Request:
.set ser0stopbits=2;
Response:
.ok;
D.4.8 Show serial interface number of stopbits
Description
The command: ‘.show ser0stopbits;’ will show the configured number of stopbits.
Argument (none)
Example
Request:
.show ser0stopbits;
Response:
.ser0stopbits=1;
.ok;
104