Saving Setups, Screen Images, or Data
1.
Press
[Save/Recall] > Save > Format
.
2.
Then, turn the
[Entry]
knob to select the type of file you want to save:
Setup (*.ipa)
The horizontal timebase, vertical sensitivity, trigger settings, measurements,
cursors, and math function settings that tell the instrument how to make a
particular measurement.
8-bit or 24-bit
Bitmap image
(*.bmp)
The screen image in full-color (24-bit) or reduced-color (8-bit) bitmap format.
24-bit image
(*.png)
The screen image in 24-bit color PNG format. Files are losslessly compressed
to be much smaller than the BMP format.
CSV data
(*.csv)
A file of comma-separated values of all displayed channels and math
waveforms. This format is suitable for spreadsheet analysis.
Binary data
(*.bin)
A binary file, with a header, and data in the form of time and voltage pairs.
Reference
Waveform data
(*.h5)
Waveform data in a format that can be recalled to one of the instrument's
reference waveform locations.
Power
Harmonics
data (*.csv)
A file of comma-separated values with harmonics power analysis results.
Analysis
Results (*.csv)
A file of comma-separated values with power analysis results for any analysis
other than harmonics.
You can also configure the
[Quick Action]
key to save setups, screen images, or data. See
Configuring the [Quick Action] Key
for details.
To save setup files
You can save setup files to one of 10 internal locations or to an external USB drive.
1.
Press
[Save/Recall] > Save > Format
. Then, turn the
[Entry]
knob to select Setup (*.ipa).
2.
Press the second softkey and use the
Entry
knob to select a save location. See
.
3.
Press
Press to Save
.
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide 161
