Integrate
∫ dt
(integrate) calculates the integral of the selected source. You can use integrate to calculate
the energy of a pulse in volt-seconds or measure the area under a waveform.
∫ dt
plots the integral of the source using the trapezoidal rule:
Where:
I = integrated waveform
Δ
t = point-to-point time difference
y = Channel or Math data points
c
o
= arbitrary constant
i = data point index
The Offset softkey lets you enter a DC offset correction for the input signal.
A small DC offset in the integrate function input or a small calibration error can cause the
integrate transform output to "ramp" as shown below. Use the
Offset
softkey to remove the
offset and prevent ramping.
Keysight IntegraVision PA2200 Series Power Analyzers Operating and Service Guide 147
