![background image](http://html2.mh-extra.com/html/keithley/6514/6514_instruction-manual_4064199028.webp)
1-6
Getting Started
Shifted
V-DROP
Enables/disables V-drop measurements for
Ω
function.
AUTO-DIS
Sets and enables/disables Auto Discharge for charge measurements.
GPIB
Configures and enables/disables GPIB interface.
RS-232
Configures and enables/disables RS-232 interface.
Middle Row
Unshifted
AVG
Configures and enables/disables digital filter.
MEDN
Configures and enables/disables median filter.
REL
Enables/disables Relative (Rel).
LIMIT
Performs configured limit tests.
DIGIT
Sets display resolution.
RATE
Selects measurement rate.
and
Controls cursor position for making selections or editing values.
Shifted
MX+B
Configures and enables/disables mX+b math function.
%
Configures and enables/disables Percent math function.
VAL
Sets Rel value and enables Rel.
CONF-LIM
Configures limit tests.
UNITS
Selects engineering units for scientific notation for display readings.
NPLC
Set rate by setting PLC value.
Bottom Row
Unshifted
STORE
Sets the number of readings to store and enables the buffer.
RCLL
Displays stored readings (including maximum, minimum, peak-to-peak, average,
and standard deviation). The
and
range keys scroll through the buffer, and the
or
key toggles between reading number and reading.
DELAY
Sets user delay between trigger and measurement.
DAMP
Enables/disables damping for current measurements.
HALT
Stops measurement process. Puts 6514 in idle state.
TRIG
Trigger measurement(s). Takes 6514 out of idle state.
EXIT
Cancels selection, moves back to measurement display.
ENTER
Accepts selection, moves to next choice or back to measurement display.
Shifted
TEST
Performs key-press test or display test.
CAL
Accesses calibration.
SAVE
Saves present setup to a memory location.
SETUP
Restores setup stored in a memory location, or to GPIB or factory defaults.
CONF-ARM
Configures Arm Layer of trigger model.
CONF-TRIG
Configures Trigger Layer of trigger model.
3 Range keys
Selects the next higher voltage measurement range.
Selects the next lower voltage measurement range.
AUTO
Enables/disables autorange.
Summary of Contents for 6514
