![background image](http://html2.mh-extra.com/html/keithley/6514/6514_instruction-manual_4064199126.webp)
Triggering
9-9
SCPI programming
Table 9-2
SCPI commands — triggering
Command
Description
Default Ref
ABORt
Reset trigger system (goes to idle state).
A
INITiate
Initiate one trigger cycle.
B
FETch?
Request latest reading.
B
READ?
Trigger and request a “fresh” reading.
B
ARM[:SEQuence[1]]
Arm Layer:
[:LAYer[1]]
:SOURce <name>
Select control source; IMMediate, TIMer, BUS,
TLINk, STESt, PSTest, NSTest, BSTest, or
MANual.
IMM
C
:COUNt <n>
Set measure count; 1 to 2500, or INF (infinite).
1
:TIMer <n>
Set timer interval; 0.001 to 99999.999 (sec).
0.1
[:TCONfigure]
:DIRection <name>
Enable (SOURce) or disable (ACCeptor) bypass.
ACC
D
[:ASYNchronous]
Configure input/output triggers:
:ILINe <NRf>
Select input trigger line; 1, 2, 3, 4, 5 or 6.
1
E
:OLINe <NRf>
Select output trigger line; 1, 2, 3, 4, 5 or 6.
2
E
:OUTPut <name>
Output trigger (TRIGger) or not at all (NONE).
NONE
TRIGger[:SEQuence[1]]
Trigger Layer:
:SOURce <name>
Select control source; IMMediate or TLINk.
IMM
:COUNt <n>
Set measure count; 1 to 2500, or INF (infinite).
1
:DELay <n>
Set trigger delay; 0 to 999.9998 (sec).
0.0
:AUTO <b>
Enable or disable auto delay.
OFF
[:TCONfigure]
:DIRection <name>
Enable (SOURce) or disable (ACCeptor) bypass.
ACC
D
[:ASYNchronous]
Configure input/output triggers:
:ILINe <NRf>
Select input trigger line; 1, 2, 3, 4, 5 or 6.
1
E
:OLINe <NRf>
Select output trigger line; 1, 2, 3, 4, 5 or 6.
2
E
:OUTPut <name>
Output trigger after measurement (SENSe) or
not at all (NONE).
NONE
:TRIGger:CLEar
Clear pending input trigger.
NONE
F
Summary of Contents for 6514
