63 of 112
Ethernet
3
5
3
4
5
6
7
8
1
2
Fig. 29:
Communication configur
ation Linux model: Ethernet
①
Refresh
reads the curr
ent settings of the communication configur
ation Linux module
②
IP address
manually issues the address
Tip
It is only possible to use this parameter if the DHCP (
⑥
) is deactivated.
③
Subnet mask
manually issues a network mask
Tip
It is only possible to use this parameter if the DHCP (
⑥
) is deactivated.
④
Gateway
enters the gateway
⑤
DHCP
activates/disactivates the automatic issuing of an IP address by a DHCP server; if the network has
a configur
ed DNS server, it is also possible to use the host name of the reader.
⑥
IPv6
enters the second IPv6 addr
ess (the first IPv6 addr
ess is the link local address)
⑦
Status
shows the current reader IP address (eth0)
⑧
Save changes
saves changes
If the data relevant to the current connection (e.g. IP address) are changed, it may cause an error and the
connection is lost.
If the interface has been configur
ed incorrectly, it is not possible to establish a connection to the reader.
►
Note the following default configur
ation settings:
Name
UHF-RFID-Dev
IP address
192.168.0.1
Subnet mask
255.255.255.0
Keep-alive time
2000 ms
DHCP
deactivated
