26 of 112
Installing the Reader
10
Installing the Reader
When the connections ar
e plugged in, the device satisfies the pr
otection class IP65 (RRU and ARU).
10.1
Selecting the Installation Site
WARNING
Danger to life fr
om electric shock or fir
e hazard due to incorr
ect voltage, insufficient ventilation,
moisture, dir
ect sunlight, heat or naked flames!
►
When installing the unit in cabinets or shelves, make sure ther
e is sufficient ventilation.
►
When selecting the installation location, make sure ther
e is sufficient space ar
ound the unit for
appropriate dissipation of the heat generated by the unit.
►
Do not expose the unit to inadmissible heat or fir
e.
►
Do not install the device close to the sources of heat, e.g. heating.
►
Do not place anything with a naked flame on the device.
►
Make sure that the maximum operating temperature from –20 to +55°C is not exceeded.
►
Make sur
e that the support surface has a sufficient load-bearing capacity/str
ength.
NOTICE
Risk of material damage due to the screws screwed into the reader housing too deep!
If the screws are screwed into the r
eader housing deeper than 10 mm, the housing is no longer water
proof.
►
When mounting the reader, make sure that the screws are screwed into the unit housing no deeper
than 10 mm.
