18 of 112
Introduction to the RIFD System
7.3
Further Reference Material
In or
der to configur
e the reader correctly and adapt it to the respective application, it is necessary to have detailed
knowledge of the EPCglobal standards of GS. This standard describes the principle of operation of the interface between
the tag and the reader.
The par
ameters available for the configur
ation of the reader are described in the
Configur
ation Manual for Kathrein RFID UHF
Readers
.
The reader is controlled via the Kathrein reader protocoll (KBRP), the current version of which is described in detail in the
Communication Protocol Kathrein RFID UHF Readers
.
Document
Application
Communication Protocol Kathrein RFID UHF Readers
software development
Configur
ation Manual for Kathrein RFID UHF Readers
commissioning
Installation Manual for Kathrein Antennas
setup and installation
EPCglobal Gen2 Specification
1)
software development
Putty – SSH Client
(
http://www.putty.org
)
software development
Make sure the version of the document matches the software version of the reader, see
https://www.kathrein-solutions.com/get-started
.
1)
EPC
TM
Radio-Frequency Identity Protocols Class-1 Generation-2 UHF RFID Version 2.0.1 at
https://www.gs1.or
g/epcrfid/epc-rfid-uhf-air-interface-pr
otocol/2-0-1
.
