8 of 112
Professional Installation Guidelines for the U.S.
4
Professional Installation Guidelines for the U.S.
4.1
Installation Personnel
UHF RFID readers require professional installation!
►
You must be a professional installer with RF and related rule knowledge.
►
The installation requires special trained professionals to access and setup the system.
►
The system is not to be installed by the general public, general user shall not attempt to install
the device or change the settings.
4.2
External Antenna
►
Y
ou must follow Part 15 of the FCC rules, and specifically Part 15.203 pertaining antenna r
equire-
ments of an intentional radiator.
►
Make sur
e to use a 13 dBi or less patch antenna.
►
Only use antennas which have been approved by the applicant. The use of none-approved anten-
na(s) may produce unwanted spurious emissions or excessive RF transmitting power which may
lead to the violation of the FCC/ISED limit and is prohibited.
4.3
Final Output Power
WARNING
►
Carefully select the installation position.
►
Make sur
e that the final output power does not exceed the limit set in r
elevant rules. The viola-
tion of the rule could lead to serious federal penalty!
If you are not a professional installer,
STOP
.
►
Do not proceed any further with the installation.
►
Do not install the unit or change the settings.
