99 of 112
14.10.1 Polarisation
2
3
1
9
Fig. 65: @KRAI: polarisation
①
sets the polarisation of the antenna
If there are sever
al types of polarisation selected at the same time, the antenna configur
ation
changes after every inventory.
②
Get polarisation
reads the current polarisation information of the antenna
③
Set polarisation
sets the polarisation on the antenna
14.10.2 LED
Depending on the features that are integrated in the antennas, it is possible to contr
ol/configur
e the LEDs.
2
3
1
4
5
6
7
8
Fig. 66: @KRAI: LED
①
LED 1
–
4
selects the function of the LED 1–4
►
For functions, see Chapter
Selecting Functions, p. 79
②
T
urn-off time
sets the turn-off time for LED
③
Get LED config
shows the curr
ent LED configur
ation
④
Set LED config
sets the new LED configur
ation
⑤
LED
selects between LED 1–4
⑥
Duration
sets the duration of how long the LED is on
;
only if protocol access is selected in
①
⑦
Set LED on
switches the LED on for the duration in milliseconds selected in
⑥
; if the duration is set to 65535
ms, the LED is permanently on
⑧
Set LED off
switches off the selected LED
