98 of 112
Operating the Reader Using the ReaderStart Software
14.10 @KRAI
T
his tab allows changing KRAI-specific settings. T
he
@KRAI
tab is divided into several sections.
Port
and
Port Info
are
always available, other sections depend on the antenna connected to the reader, e.g.
Polarisation
,
Direction
etc.
The Reader recognises the connected antennas at boot up, but it is also possible to manually recognise a single port or
all ports under
Port
.
Port Info
displays the information about the antenna.
2
3
1
4
5
6
7
8
9
10
Fig. 64: @KRAI: polarisation
①
All/Port 1
–
4
selects either one or all antennas for
Initialise port
(
③)
②
Get port info
retrieves port information for a selected @KRAI antenna
③
Initialise port
runs a query of the antennas on this port/these ports
④
Antenna Id
shows the antenna ID
⑤
Description
shows the description of the antenna
⑥
Number of
antennas
shows the number of the antennas connected to the port
⑦
Frequency range
shows the frequency range the antenna operates in (
Global
/
EU
/
FCC
)
⑧
Revision
shows the hardware version of the antenna
⑨
Antenna
properties
shows antenna properties, e.g.
polarisation adjustable
,
LEDs available
Different configur
ation options are displayed, depending on the types of the connected antennas. The category
Polarisa-
tion
is shown for antennas with polarisation switching, the
Jumper Cable Attenuation
is available for smart shelf antennas,
e.g. SMSH-30-30KRAI,
LED
is shown for @KRAI WIRA 70 and
Direction
for CSB KRAI antennas, e.g. WiRa 30º.
