41 of 112
1
2
3
4
Fig. 14: Establishing connection to the reader
Establishing the Connection via an IP Address
1. Click the
IP address
field (
①
in
Fig. 14
).
2. Enter the IP address.
Establishing the Connection Using a Host Name
1. Click the
Name
field (
②
in
Fig. 14
).
2. Enter the host name of the reader.
If you do not know the name of the reader, click
Search for Readers
.
➯
The readers found in the network are shown with their names, see
⑤
in
Fig. 15.
Tip
►
To allow only secure SSH connection with an encrypted transmission to the reader, check the box next
to the lock symbol (
④
in
Fig. 14
); see also
Establishing a Secur
e Connection, p. 59
.
5
6
Fig. 15: Establishing connection to the reader: search for
readers
The following steps describe establishing
the connection for readers with an IP
address.
3. In the
Ethernet
block, click
Search for Readers
(
③
in
Fig. 14
).
➯
The screen on the left appears.
4. Select a reader under
Readers with IP Address
(
⑤
in the
figur
e on the left).
5. If there have been 2 or more DHCP requests sent by
the reader, the
Readers without IP Address (DHCP)
field
(
⑥
) is expanded. Then it is possible to assign the IP
address to the reader.
