Juniper ULTRA-RUGGED FIELD PC, Reference Manual

Page: 98 / 170

Do not install the battery pack backwards so that the
polarity is reversed.
Do not connect the positive terminal and the
negative terminal of the battery pack to each other
with any metal object (such as wire).
Do not solder directly onto the battery pack.
Do not place the battery pack in direct sunshine.
In the rare event that the battery pack leaks and fluid
gets into the eye, do not rub the eye. Rinse well with
water and immediately seek medical care.
Dispose of the battery pack properly. See the section
below,
Disposing of your Field PC and battery packs
for instructions.
Equipment warnings
WARNING!
To reduce the risk of personal injury,
electrical shock, fire or damage to the equipment:
Plug the wall charger into an electrical outlet that is
easily accessible at all times.
Disconnect power from the equipment by
unplugging the wall charger from the electrical outlet
or unplugging the synchronization cable from the
host computer.
Do not place anything on the wall charger cord or
any of the other cables. Arrange them so that no one
may accidentally step on or trip over them.
Do not pull on a cord or cable. When unplugging the
wall charger from the electrical outlet, pull on the
plug, not the cord.
Use only wall chargers intended for the Field PC. Using
any other external power source can damage your
product and void your warranty.
•
•
•
•
•
•
•
•
•
•
•
!!
90