Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 30 / 170

22
Understanding LED
signals
The Field PC signals events and processes using a
charge LED and a notification LED.
Charge LED. This red light appears to the left of the
Start menu button. A flashing light signals that the
battery is currently charging; a solid light signals that
the wall charger is connected but that the battery is
fully charged.
Note : When the device is suspended or
powered off, the charge LED does not appear.
Notification LED. Appearing on the right side of the
Enter button, the green notification LED appears briefly
when you power on the unit after the device is reset or
restored to factory defaults.
Replacing the battery
pack
To replace the battery pack, follow these steps:
1. Close all running programs.
2. Suspend the device.
CAUTION: The device only stays
on for about five seconds without a
power source. Always suspend your
device before replacing the battery
pack.
3. Carefully unhook and lift up the
bottom hand strap hook.
CAUTION: Releasing the hand strap
hook too quickly may result in injury
or damage to the display. Use caution when undoing
the hook or when holding the Field PC by its hand strap.
!!
!!