manualshive.com logo in svg

Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 26 / 170

Share
Download
Juniper ULTRA-RUGGED FIELD PC Reference Manual Download Page 26

18

To power off the Field PC,
1.  Save your open files and close any running 

programs. (For instructions on backing up files, see 

Backing up data

 in Chapter 5.)

2.  Press the Power button until 

the Power Button menu 
appears, as shown here. 

 

Note: The device cannot be 
powered off while it is plugged 
into the wall charger.

3.  Tap 

Power Off

. A warning 

dialog appears, as shown in 
the second picture. Tap 

OK

. 

 

Note: The keyboard backlight 
stays on for a few seconds after 
the device shuts off. The device 
cannot be powered back on 
until the keyboard backlight 
turns off. 

To power on your Field PC, hold down the Power button 
until you see the green notification light appear.  

Resetting the device. 

Some programs require you to 

reset your device during the installation process. Follow 
the steps below to reset the Field PC: 
1.  Save your open files and close any running 

programs. (For instructions on backing up files, see 

Backing up data

 in Chapter 5.)

2.  Press the Power button until the Power Button 
 

menu appears.

3.  Choose 

Reset

. 

If your device locks up, you can reset the device by 
pressing the Power button for 10 seconds or until the 

Summary of Contents for ULTRA-RUGGED FIELD PC











































































































































































Reviews:

No comments