Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 47 / 170

39
Chapter 5: Performing Common Tasks on the Field PC
Note: If you suspend the device while it is charging, the
flashing charge LED disappears. However, the device
continues to charge.
Powering off the Field PC
Powering off the device ends all programs and removes
power from all system components except for the
real-time clock. Powering off your device saves power
without draining the battery.
We recommend powering off the mobile device if it will
be inactive for more than one week.
To power off the Field PC, follow these steps:
1. Save and close all applications. (For instructions on
backing up your files, see the section in this chapter
called
Backing up data
.)
2. Press the Power button until
the Power Button
menu appears, as shown here.
3. Tap Power Off , then OK .
Note: The keyboard backlight
stays on for a few seconds after
the device shuts off. Until the
keyboard backlight turns off, the
device cannot be powered on
again.
To power on the device, hold the power button until
the green notification LED appears. The device is now
booting. This process takes about a minute.