Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 82 / 170

74
This chapter describes the
Bluetooth
®
profiles
recognized by the Microsoft drivers installed on your
Field PC. Drivers determine which devices your Field
PC can communicate with. If you are using an external
Bluetooth CF or SDIO card and you installed a new
driver specific to this card (recommended), consult the
documentation that came with the driver for instructions
about its profiles.
Note: Bluetooth cards are not recognized by modules
with integrated Bluetooth. For general instructions about
using an integrated Bluetooth module, see Chapter 8.
This chapter is organized by Bluetooth profile, each of
which is briefly described below. Instructions for using
each profile to create Bluetooth partnerships follow.
Serial Port Profile (SPP)
. Similar to a serial cable, this
profile acts as a liaison between two devices, such as
the Field PC and a GPS receiver, using virtual ports.
(These ports are described in the previous chapter.)
Dial-Up Networking (DUN) . Lets you connect to
a computer through a cell phone or a Bluetooth-
enabled modem.
Human Interface Device (HID) . Allows you to
communicate between the Field PC and a Bluetooth
keyboard or mouse.
Object Push Profile (OPP)
. This profile lets you
exchange files like data, audio, business cards,
appointments, and contacts. Similar to the well-
known object exchange profile (OBEX).
•
•
•
•
Chapter 9
Supported
Bluetooth
®
Profiles