Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 33 / 170

Chapter 3: Using the Hardware
25
This section explains how to:
Install and operate USB accessories on the Field PC
Remove the standard cap to access CF and SDIO
card slots
Install CF and SD cards
Replace CF and SD cards
Copy files from a CF or SD card or USB drive
Reattach the standard cap
Installing and operating USB devices on the Field PC.
The USB Host accepts several USB devices, including
keyboards and USB flash drives.
Note: To be compatible with Windows Mobile
®
6,
some USB serial devices require drivers. Refer to your
USB device’s manual or contact the manufacturer to
determine compatibility.
To install a USB device, plug the mini end of a USB
communications cable into the USB Host (labeled A on
your device). You may need to use a USB mini-to-full
size adapter.
Removing the standard cap to access CF and SDIO
card slots.
The removable standard cap on the Field PC
is designed to protect peripheral devices ( e.g. , CF cards)
when they are inserted into the Field PC and to protect
the Field PC when no peripheral device is inserted.
To remove the standard
cap, follow these steps:
1. Remove the stylus.
2. Unscrew the top
screws until you can
slide off the standard
cap. The screws are
designed to stay
attached to the
standard cap.
•
•
•
•
•
•