Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 100 / 170

Touchscreen.
To clean the touchscreen, follow these
steps:
1. Press the power button briefly to suspend the device.
2. If you applied a protector to the touchscreen,
carefully remove it.
3. Apply water or a mild cleaning solution such as
Windex
®
or 409
®
to a microfiber cloth and gently
wipe off the touchscreen. Other approved cleaners
include
Citrus Wonder
®
and
Citrus All Purpose
Cleaner
®
.
CAUTION:
Do not use tissues, paper towels, or harsh
cleaning agents to clean the touchscreen.
4. If you used a cleaning solution, rinse the touchscreen
with water and dry it with a microfiber cloth.
5. Press the power button to resume the device.
CAUTION: Long exposure to the following solutions may
damage your device:
pine oil
oil based paint
automotive brake cleaner
isopropyl alcohol
carburetor cleaner
In case the device is exposed to one of these solutions,
wipe it off with a mild cleaning solution.
Case overmolding. Clean the rubber-like overmolding
that surrounds the case with a cloth and a mild cleaning
solution like
409 or Citrus Wonder . After you are done
cleaning, rinse the device with water.
Communications module (area housing the USB
port, DC jack, serial port).
To clean the communications
module, run it under a faucet. Use a soft toothbrush or
toothpick to clean out any remaining dirt.
•
•
•
•
•
!!
!!
92