Juniper ULTRA-RUGGED FIELD PC, Reference Manual, Page: 79 / 170

To assign the COM port in your navigation program, you
would then follow these steps:
1. Locate the place in the navigation program where
the COM port is chosen.
2. Select COM Port 6 as the COM port for the Bluetooth
GPS receiver.
Set up an incoming
Bluetooth COM port
Use this option if you want to assign the virtual COM
port as an Incoming COM port (i.e., you want another
device to initiate communications with the Field PC). If
you are connected with a Bluetooth device that supports
serial communications, follow these steps to set up the
incoming Bluetooth COM port:
1. Press the
COM Ports tab.
2. Tap on New Incoming Port .
3. Select a numbered COM port from the list.
Note: If the port cannot be created, it is in use. Select
a different numbered port.
4. Important: Deselect (clear) the Secure Connection
checkbox. Deselecting this option ensures that the
device disconnects its Bluetooth connection only
when you tell it to.
5. Tap
Finish
.
For more information about using Bluetooth to connect
to other devices, see the next chapter,
Supported
Bluetooth Profiles .
71
Chapter 8: Using the Integrated Bluetooth Option