Juniper JUNOSE, Configuration Manual

Page: 665 / 738

Table 94: show ip bgp l2vpn Output Fields (continued)
Field Description Field Name
Status codes for the route, listed before the Prefix:
■
>—best route
■
*—invalid route
■
s—suppressed route
■
d—dampened route
■
r—rejected route
■
a—auto-summarized route
■
m—multihomed backup route; not used to trigger pseudowire
Status codes
Route prefix in the format siteID : blockOffset Prefix
IP address of the peer from which the route was learned Peer
IP address of the next router that is used when a packet is
forwarded to the destination network Next-hop (or Next hop IP
address)
Multiexit discriminator for the route MED
Local preference for the route LocPrf
Weight of the route Weight
Origin of the route Origin
AS path through which this route has been advertised AS path
Description of the extended communities associated with this route.
Includes route target, community type, encapsulation, control word
and sequencing use, L2VPN link MTU, layer 2 D-bit (Site-is-Down)
setting. Extended communities
Related Topics
show ip bgp l2vpn
■
■
show ip bgp l2vpn vpls
Monitoring BGP Next Hops for VPLS
Purpose
Display information about BGP next hops in the L2VPN address family or in the VPLS
address family.
Action
To display next hop information that matches the specified indirect next-hop address
(2.2.2.2) in the L2VPN address family:
host1# show ip bgp l2vpn all next-hops 2.2.2.2
Indirect next-hop 2.2.2.2
Monitoring BGP Next Hops for VPLS
■ 629
Chapter 11: Monitoring VPLS