Juniper JUNOSE, Configuration Manual

Page: 651 / 738

SiteRange: 20
VPLS Route Targets
No Route Targets configured
Flood Next Hop: Index 1048578
Meaning
Table 85 on page 615 lists the show bridge group details command output fields.
Table 85: show bridge groups details Output Fields
Field Description Field Name
Name of the VPLS instance for which information is displayed BridgeGroup
Bridging capability currently enabled; for a VPLS instance, this field
always displays default Bridge Mode
Length of time, in seconds, that a MAC address entry can remain
in the forwarding table before expiring Aging Time
Whether acquisition of dynamically learned MAC addresses is
enabled or disabled Learning
Maximum number of dynamic MAC addresses that the VPLS
instance can learn Max Learn
Whether SNMP link status processing is enabled or disabled Link Status Snmp Traps
Name of the subscriber policy currently in effect Subscriber Policy
Number of ports currently configured for the VPLS instance,
including network interfaces and the VPLS virtual core interface Port Count
Number of network interfaces currently configured for the VPLS
instance Interface Count
Name of the transport virtual router configured for the VPLS
instance Transport Virtual Rtr
Unique route distinguisher configured for the VPLS instance Route Distinguisher
Site name configured for the VPLS instance SiteName
Numerical site identifier configured for the VPLS instance SiteId
Status of the site. Yes designates a multihomed site. No designates
a site that is not multihomed. Multi-homed
Priority value for the VPLS instance for the multihomed site;
displayed only when the value for the Multi-homed field is Yes Site-Priority
Maximum number of sites that can participate in the VPLS domain
associated with the VPLS instance SiteRange
Extended community identifiers, also known as route targets, for
each VPLS instance configured on the router VPLS Route Targets
Monitoring VPLS Configuration and Statistics for all VPLS Instances
■ 615
Chapter 11: Monitoring VPLS