Juniper JUNOSE, Configuration Manual

Page: 601 / 738

Table 72: show mpls interface and show mpls l2transport interface Output Fields
(continued)
Field Description Field Name
Number of bytes in the queue Queue length
Total number of packets and bytes forwarded by this interface Forwarded packets, bytes
Total number of committed packets and bytes dropped by this
interface Dropped committed
packets, bytes
Total number of conformed packets and bytes dropped by this
interface Dropped conformed
packets, bytes
Total number of exceeded packets and bytes dropped by this
interface Dropped exceeded
packets, bytes
Type (input, output) and name of policy MPLS policy
Entry index classifier-group entry
Number of packets and bytes on the interface packets, bytes
Name of profile rate-limit-profile
Number of packets and bytes that conform to the committed access
rate Committed
Number of packets and bytes that exceed the committed access
rate but conform to the peak access rate Conformed
Number of packets and bytes that exceed the peak access rate Exceeded
VC label sent by this router to upstream neighbor for route In label
VC label received by this router from downstream neighbor for
route Out label
MPLS statistics for traffic received or sent MPLS statistics
Number of packets received or sent pkts
Number of high-capacity (64-bit) packets received or sent hcPkts
Number of octets received or sent octets
Number of high-capacity (64-bit) octets received or sent hcOctets
Number of packets that are dropped for some reason at receipt or
before being sent errors
Number of packets that are discarded because of lack of buffer
space at receipt or before being sent discardPkts
Interface specifier Interface
IP address of the remote PE router or name of the tunnel Remote-PE or LSP-name
Monitoring MPLS Layer 2 Interfaces for Layer 2 Services over MPLS
■ 565
Chapter 8: Monitoring Layer 2 Services over MPLS