Juniper JUNOSE, Configuration Manual

Page: 711 / 738

LN = Local Site not Designated
RN = Remote Site not Designated
Remote MPLS Up-down
Site State PE In-label Out-label NH Idx Time
---- ----- ------- -------- --------- -------- -----------
2 UP 2.2.2.2 17 801024 00000014 1d 08:45:34
3 UP 2.2.2.2 18 801028 00000014 1d 08:45:34
Meaning
Table 106 on page 675 lists the show l2vpn connections command output fields.
Table 106: show l2vpn connections Output Fields
Field Description Field Name
Name of the VPWS instance L2VPN
Encapsulation type configured for the VPWS instance Encapsulation Type
Local preference for control word, preferred or not preferred Use of control word
Local preference for sequence number, send or don’t send sequence numbers
Route distinguisher configured for the VPWS instance Route Distinguisher
Maximum number of customer sites allowed in the VPWS instance Site Range
Site name and site ID for each customer site in the VPWS instance Sites
Priority of the VPWS instance to serve as the backup PE router for
the CE device in the event of a network failure in the multihomed
configuration; indicates also that the site is multihomed Multihomed priority
Route targets configured for the VPWS instance Route Targets
Layer 2 interface that is a member of the VPWS instance Interface
Local customer site ID configured on the layer 2 interface Local-Site-Id
Remote customer site ID configured on the layer 2 interface Remote-Site-Id
Related Topics
■
show l2vpn connections
Monitoring VPWS Instances
Purpose
To display configuration and status information for VPWS instances configured on
the router. You can display information for all VPWS instances or information about
a particular VPWS instance. The
detail keyword displays detailed information about
the specified VPWS instance or all VPWS instances.
Action
To display information about all VPWS instances configured on the router:
Monitoring VPWS Instances
■ 675
Chapter 14: Monitoring VPWS