Juniper JUNOSE, Configuration Manual

Page: 521 / 738

■
In Received Packets, Bytes—Total number of packets and bytes received on
an IP interface
■
Unicast—Number of unicast packets and bytes received on an IP
interface
■
Multicast—Number of multicast packets and bytes received on an IP
interface
■
In Policed Packets—Number of packets discarded on a receive IP interface
because of token bucket limiting
■
In Error Packets—Number of packets discarded on a receive IP interface
because of IP header errors
■
In Invalid Source Address Packets—Number of packets discarded on a receive
IP interface because of invalid IP source address (sa-validate enabled)
■
Out Forwarded Packets, Bytes—Number of packets and bytes forwarded
out an IP interface
■
Unicast—Number of unicast packets and bytes forwarded out an IP
interface
■
Multicast—Number of multicast packets and bytes forwarded out an IP
interface
■
Out Scheduler Drops Committed Packets—Number of committed packets
dropped because of out queue threshold limit
■
Out Scheduler Drops Conformed Packets—Number of conformed packets
dropped because of out queue threshold limit
■
Out Scheduler Drops Exceeded Packets—Number of exceeded packets
dropped because of out queue threshold limit
■
Out Policed Packets—Number of packets discarded on a forwarding IP
interface because of token bucket limiting
■
Examples
host1# show ip interface vrf vpn1
null0 is up, line protocol is up
Network Protocols: IP
Internet address is 255.255.255.255/255.255.255.255
Broadcast address is 255.255.255.255
Operational MTU = 1500 Administrative MTU = 0
Operational speed = 100000000 Administrative speed = 0
Discontinuity Time = 0
Router advertisement = disabled
Administrative debounce-time = disabled
Operational debounce-time = disabled
Access routing = disabled
Multipath mode = hashed
atm4/0.77 is up, line protocol is up
Network Protocols: IP
Internet address is 7.8.7.7/255.255.255.0
Broadcast address is 255.255.255.255
Monitoring BGP/MPLS VPNs
■ 485
Chapter 5: Configuring BGP-MPLS Applications