Juniper JUNOSE, Configuration Manual

Page: 715 / 738

Table 108: show l2vpn interface Output Fields (continued)
Field Description Field Name
Name of the VPWS instance to which the interface belongs Member of L2VPN instance
Local customer site ID configured on the interface Local site ID
Remote customer site ID configured on the interface Remote site ID
Local preference for the control word, preferred or not preferred Control word
Local preference for sequence numbers, send or don’t send send sequence numbers
Type of signaling and encapsulation used by the router for layer 2
traffic Relay format
Administrative state of the interface, enabled or disabled Administrative state
Operational state of the interface, up or down Operational state
Maximum allowable size in bytes of the maximum transmission
unit for the interface Operational MTU
UID automatically assigned to the MPLS shim interface when it is
created MPLS shim interface UID
UID automatically assigned to the MPLS major interface when it is
created Lower interface UID
Internal, platform-dependent, 32-bit representation of the interface
location, used by Juniper Networks Customer support for
troubleshooting. Condensed location
Number of packets, bytes, errors and discards received on the
interface Received
Number of packets, bytes, errors and discards sent from the
interface Sent
Number of messages queued to be sent on the interface queue
Type of traffic class configured for traffic on the interface traffic-class
ATM virtual circuit to which the interface is bound bound to
Length of all messages queued to be sent to on this connection, in
bytes Queue length
Number of packets and bytes that have been forwarded Forwarded
Number of committed packets and bytes that have been dropped Dropped committed
Number of conformed packets and bytes that have been dropped Dropped conformed
packets
Number of exceeded packets and bytes that have been dropped Dropped exceeded
Monitoring L2VPN Interfaces for VPWS
■ 679
Chapter 14: Monitoring VPWS