Always compare MED is disabled
Compare MED within confederation is disabled
Advertise inactive routes is disabled
Advertise best external route to internal peers is disabled
Enforce first AS is disabled
Missing MED as worst is disabled
Route flap dampening is disabled
Maximum number of equal-cost EBGP paths is 2
Maximum number of equal-cost IBGP paths is 2
Log neighbor changes is disabled
Fast External Fallover is disabled
No maximum received AS-path length
BGP administrative distances are 20 (ext), 200 (int), and 200 (local)
Client-to-client reflection is enabled
Cluster ID is 10.13.13.13
Route-target filter is enabled
Default IPv4-unicast is enabled
Redistribution of iBGP routes is disabled
Graceful restart is globally disabled
Global graceful-restart restart time is 120 seconds
Global graceful-restart stale paths time is 360 seconds
Graceful-restart path selection defer time is 360 seconds
This platform supports only the receiver role of graceful restart
Route Distinguisher: 100:11
Import route map: test2-import-map
Export route map: test1-export-map (can not filter routes)
Global import route map: test3-global-import-map
103 routes imported from global table (max 5000 routes allowed)
Global export route map: test4-global-export-map
Local-RIB version 7. FIB version 7.
Messages Messages Prefixes
Neighbor AS State Up/down time Sent Received Received
11.11.11.11 400 Established 00:36:19 78 81 2
12.12.12.12 400 Established 00:36:21 78 78 1
103.103.103.3 300 Established 00:36:34 85 80 2
■
Example 2—Status of next hop reachability checking is displayed only if you
specify
vpnv4
.
host1#
show ip bgp vpnv4 all summary
Local router ID 10.13.5.19, local AS 100
Administrative state is Start
BGP Operational state is Up
...
Default IPv4-unicast is enabled
Redistribution of iBGP routes is disabled
Check reachability of next-hops for VPN routes is enabled
...
■
Example 3—Status of fields related to enabling local AS numbers to be received
in routes
host1#
show ip bgp summary fields remote-as state rib-version
send-queue-length more-in-queue
Send More
Neighbor AS State RIB Ver Q InQ
2.2.2.2 100 Established 2 0 no
196
■
Monitoring BGP
JUNOSe 11.0.x BGP and MPLS Configuration Guide
Summary of Contents for JUNOSE
