Juniper JUNOSE, Configuration Manual

Page: 109 / 738

■
Use to match a community list.
■
Supported for inbound and outbound route maps.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match community comm5
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match community
match distance
■
Use to match any routes that have the specified administrative distance.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match distance 25
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match distance.
match extcommunity
■
Use to match an extended community list in a route map.
■
You can specify one or more extended community list names in a match clause.
If you specify more than one extended community list, the lists are logical ORed.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match extcommunity topeka10
■
Use the no version to remove the match clause from a route map or a specified
value from the match clause.
■
See match extcommunity.
match ip address
■
Use to match any route that has a destination network number that is permitted
by an access list, a prefix list, or a prefix tree, or performs policy routing on
packets.
■
Example
host1(config)# route-map nyc1 permit 10
host1(config-route-map)# match ip address prefix-tree boston
■
Use the no version to delete the match clause from a route map or a specified
value from the match clause.
■
See match ip address.
Configuring BGP Routing Policy
■ 73
Chapter 1: Configuring BGP Routing