Juniper JUNOSE, Configuration Manual

Page: 658 / 738

host1# show bridge vplsTest port brief
Port Interface Status
------ ------------------------- ------------
1 FastEthernet1/1.1 Up
2 ATM10/1.1.1 Up
3 vpls vplsTest Up
Meaning
Table 89 on page 622 lists the show bridge port command output fields.
Table 89: show bridge port Output Fields
Field Description Field Name
Name of the VPLS instance to which the interface belongs BridgeGroup
Port number on which this interface resides Port Number
Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent Operational Status
State of the physical interface: Up, Down Admin Status
Whether SNMP link status processing is enabled or disabled for
the specified interface Snmp Link Status Trap
Maximum number of dynamic MAC addresses that the interface
can learn Max Learn
Name of the subscriber policy currently in effect for the interface Subscriber Policy
Displays statistics information for the specified port Statistics
Number of octets received on this interface In Octets
Number of frames received on this interface In Frames
Number of incoming packets discarded on this interface In Discards
Number of incoming errors received on this interface In Errors
Number of octets transmitted on this interface Out Octets
Number of frames transmitted on this interface Out Frames
Number of outgoing packets discarded on this interface Out Discards
Number of outgoing errors on this interface Out Errors
Elapsed time since statistics counters were last reset Time since counters last
reset
Hardware packet queue associated with the specified traffic class
and interface queue
Length of the queue, in bytes Queue length
Number of packets and bytes forwarded on this queue Forwarded packets, bytes
622 ■
Monitoring Configuration, Statistics, and Status for VPLS Ports
JUNOSe 11.0.x BGP and MPLS Configuration Guide