Juniper JUNOSE, Configuration Manual

Page: 225 / 738

■
Use to display information about BGP peer groups.
■
Field descriptions
■
BGP peer group—Name of a BGP peer group
■
remote AS—Number of the remote AS
■
Description—Textual description of the BGP peer group
■
Members—IP addresses of the members of the BGP peer group
■
Default originate—Status of default origination of the BGP peer group
■
EBGP multi-hop—Status of EBGP multihop for the peer group
■
IBGP single-hop—Status of IBGP single hop for the peer group
■
BFD—Status of BFD configuration for the peer group
■
BFD session—Type and address of peer to which BFD session is established
■
Minimum transmit interval—Desired time interval between BFD packets
transmitted to members of peer group
■
Minimum receive interval—Desired time interval between BFD packets
received from members of peer group
■
Multiplier—Number of BFD packets that can be missed before declaring BFD
session down
■
Next hop self—Status of next-hop self information for the peer group
■
Peers are route reflector clients—BGP peer group is configured as a route
reflector. This field does not appear when route reflectors are not configured.
■
weight—Neighbor weights assigned to BGP peer groups
■
Incoming update distribute list—Distribute lists for incoming routes, if
configured
■
Outgoing update distribute list—Distribute list for outgoing routes, if
configured
■
Incoming update filter list—Filter list for incoming routes, if configured
■
Outgoing update filter list—Filter list for outgoing routes, if configured
■
Weight filter list—Weight filter list for routes, if configured
■
Incoming route map—Incoming route map, if configured
■
Outgoing route map—Outgoing route map, if configured
■
Minimum route advertisement interval—Minimum time between route
advertisements
■
Configured update source IP address—IP address used when sending update
messages
Monitoring BGP
■ 189
Chapter 1: Configuring BGP Routing