Juniper JUNOSE, Configuration Manual

Page: 214 / 738

■
negotiated BGP version—BGP version being used to communicate with the
neighbor
■
Administrative status—Desired state of the peer connection
■
Connection state—Current state of the BGP connection
■
Connection has been established—Time that TCP connection was established
■
Reason for last reset—Reason for last reset of the BGP session
■
TCP error code—TCP connection error type
■
Default originate—Status of default originate (enabled or disabled)
■
EBGP multi-hop—Status of EBGP multihop (enabled or disabled)
■
IBGP single-hop—Status of IBGP single hop (enabled or disabled)
■
Next hop self—Status of next-hop self (enabled or disabled)
■
Route reflector status—Identifies the neighbor as a route-reflector client
■
Neighbor weight—Weight of routes from the BGP neighbor
■
Incoming update distribute list—Distribute list for incoming routes, if
configured
■
Outgoing update distribute list—Distribute list for outgoing routes, if
configured
■
Incoming update filter list—Update filter list for incoming routes, if configured
■
Outgoing update filter list—Update filter list for outgoing route, if configured
■
Weight filter list—Weight filter list for routes, if configured
■
Incoming route map—Incoming route map, if configured
■
Outgoing route map—Outgoing route map, if configured
■
Connect retry interval—Time between a BGP peer’s attempts to reestablish
a connection to the neighbor
■
Minimum route advertisement interval—Minimum time between route
advertisements
■
Minimum AS origination interval—Minimum time between advertisement
of changes within the speaker’s AS
■
Configured keep-alive interval—Frequency of keep-alive messages generated
■
Negotiated keepalive interval—Negotiated frequency of keep-alive messages
generated
■
Configured hold time—Configured maximum time allowed between received
messages
178 ■
Monitoring BGP
JUNOSe 11.0.x BGP and MPLS Configuration Guide