Juniper JUNOSE, Configuration Manual

Page: 228 / 738

■
If you filter the display with field options, the usual introductory information
about BGP attributes is displayed only if you issue the
intro fields option. See
show ip bgp for descriptions of the fields displayed by this keyword.
■
See show ip bgp regexp.
■
See show bgp ipv6 regexp.
Examples for regexp and
quote-regexp
In many cases, you can use either show ip bgp regexp or show ip bgp quote-regexp
with the same results. For example, to show all routes whose AS-path starts with
200 you can use either command as follows:
host1# show ip bgp regexp ^200
Local router ID 192.168.1.232, local AS 100
6 paths, 3 distinct prefixes (324 bytes used)
3 paths selected for route table installation
7 path attribute entries (872 bytes used)
Prefix Next-hop MED CalPrf Weight AS-path
10.99.1.2/32 10.1.1.2 100 100 200
10.99.1.3/32 10.1.1.2 100 100 200 10
10.99.1.4/32 10.1.1.2 100 100 200 10 20
host1#
show ip bgp quote-regexp ^200
Local router ID 192.168.1.232, local AS 100
6 paths, 3 distinct prefixes (324 bytes used)
3 paths selected for route table installation
7 path attribute entries (872 bytes used)
Prefix Next-hop MED CalPrf Weight AS-path
10.99.1.2/32 10.1.1.2 100 100 200
10.99.1.3/32 10.1.1.2 100 100 200 10
10.99.1.4/32 10.1.1.2 100 100 200 10 20
If the regular expression contains one or more spaces, you must place quotation
marks around the expression in the
show ip bgp quote-regexp command but not
in the show ip bgp regexp command. For example, to show all routes whose AS-path
contains AS number 10 followed immediately by AS number 20:
host1# show ip bgp regexp 10 20
Local router ID 192.168.1.232, local AS 100
6 paths, 3 distinct prefixes (324 bytes used)
3 paths selected for route table installation
7 path attribute entries (872 bytes used)
Prefix Next-hop MED CalPrf Weight AS-path
10.99.1.4/32 10.1.1.2 100 100 200 10 20
host1#
show ip bgp quote-regexp 10 20
^
% Invalid input detected at '^' marker.
host1#
show ip bgp quote-regexp “ 10 20"
Local router ID 192.168.1.232, local AS 100
6 paths, 3 distinct prefixes (324 bytes used)
3 paths selected for route table installation
7 path attribute entries (872 bytes used)
Prefix Next-hop MED CalPrf Weight AS-path
10.99.1.4/32 10.1.1.2 100 100 200 10 20
The show ip bgp regexp command accepts multiple strings as arguments. If you try
to apply output filtering, the command interprets the filter information as a regular
expression and fails:
192 ■
Monitoring BGP
JUNOSe 11.0.x BGP and MPLS Configuration Guide