Juniper JUNOSE, Configuration Manual

Page: 381 / 738

Table 48: show mpls interface Output Fields (continued)
Field Description Field Name
Number of high-capacity (64-bit) packets received or sent hcpkts
Number of packets that are dropped for some reason at receipt or
before being sent errors
Number of packets that are discarded due to lack of buffer space
at receipt or before being sent discards
Number of adjacencies currently established adjacency
Number of sessions currently established session
Cumulative total number of adjacencies established since interface
is up accum adjacency
Cumulative total number of sessions established since interface is
up accum session
Number of hello messages received hello recv
Number of hello messages sent hello sent
Number of hello messages rejected hello rej
Number of adjacencies set up adj setup
Number of adjacencies deleted adj deleted
Related Topics
■
show mpls interface
Monitoring MPLS Minor Interfaces
Purpose
Display status and configuration information about MPLS minor interfaces.
The show mpls interface minor command displays the same information.
Action
To display information about MPLS minor interfaces:
host1:pe1# show mpls minor-interface
MPLS minor interface pe1-to-pe2 (transmit)
Stacked on MPLS major ATM2/0.10
Operational state is up
Sent:
0 packets
0 bytes
queue 0: traffic class best-effort, bound to atm-vc ATM2/0.10
Queue length 0 bytes
Forwarded packets 0, bytes 0
Monitoring MPLS Minor Interfaces
■ 345
Chapter 4: Monitoring MPLS