Juniper JUNOSE, Configuration Manual

Page: 300 / 738

■
Classifying Traffic for Differentiated Services on page 299
■
Example Traffic Class Configuration for Differentiated Services on page 304
Basic MPLS Configuration Tasks
Configuring an MPLS network includes a number of tasks:
To configure an MPLS network:
■
Configure settings common to all MPLS usage on a given LSR.
See “MPLS Global Configuration Tasks” on page 265.
■
(Optional) Configure LDP or RSVP-TE interface profiles.
See “LDP and RSVP-TE Interface Profile Configuration Tasks” on page 269.
■
Configure each interface on an LSR that uses MPLS.
See “MPLS Interface Configuration Tasks” on page 270.
■
Configure MPLS tunnels or topology-driven LSPs.
See “MPLS Tunnel Configuration Tasks” on page 272.
■
(Optional) Configure a profile that contains settings to be used by multiple MPLS
tunnels.
See “MPLS Tunnel Profile Configuration Tasks” on page 273.
Many users find it convenient to configure MPLS by completing the tasks in each set
of tasks before moving to the next set. However, you do not have to complete the
tasks in the listed order. For example, you might perofrm all the pure MPLS tasks
relevant to your network and then perform all the relevant LDP or RSVP-TE tasks.
The type of network you want to implement determines which sets of tasks you must
complete, as indicated in Table 27 on page 264.
Table 27: Configuration Tasks by Type of Network
Topology-Driven Network
(Best-Effort, Hop-by-Hop, LDP) Traffic Engineering
Network
Task Set
Yes Yes Global
Optional Optional Interface Profile
Yes Yes Interface
No Yes Tunnel
No Yes Tunnel Profile
In addition to the basic configuration tasks, you might need to perform other LDP
or RSVP-TE configuration tasks.
264 ■
Basic MPLS Configuration Tasks
JUNOSe 11.0.x BGP and MPLS Configuration Guide