Jungheinrich EFX 410, Operating Instructions Manual

Page: 283 / 404

8.7
Horizontal positioning (
o
)
Your truck may optionally be equipped with the “Horizontal Positioning (HozPos)”
function. This function supports the owner in positioning (automatic, direct targeted
positioning of the pallet location) the truck in the rack and at the transfer station. In
conjunction with the integrated rack height select, this provides for consistent
stopping and load collecting in the rack and at transfer stations with minor, monitored
deviations. The positioning accuracy is ± 10 mm vertically and ± 30 mmhorizontally.
"Horizontal Positioning (HozPos)" offers programmable warehouse conditions. The
setting is made by the manufacturer's customer service department.
To achieve constant stacking depths widths over the entire lift height, ten height-
dependent traverse adjustment values can be programmed as an option. The setting
is made by the manufacturer's customer service department.
When entering the narrow aisle, the narrow aisle and the position of the load handler
are checked.
Options
– Manual entry of destination via cursor keys and numerical keypad
– Entry of destination via barcode scanner on the control panel or load handler
– Destination entry via radio connection
– Type of stacking operation, see page 274
– Extension lock during travel without target or incorrect target
Z
Maintenance intervals are specified in the section Maintenance, Inspection and
Changing of Maintenance Parts Requiring Replacement, see page 357.
281
04.19 en-GB