Jungheinrich EFX 410, Operating Instructions Manual

Page: 241 / 404

7.2.2 Special functions depending on the ground conditions
– Aisle type identification within a warehouse.
– Speed reductions for escape routes within the lane.
– Stopping for escape routes within the lane.
– Zone change within a lane with short range recognition.
– Twin lane width recognition. Protection field change – wider monitoring field on
one side.
– Option of fitting additional sensors for operator position carriage control with lower
cutout on detection of persons.
7.3 Environmental awareness
The safety laser scanner is designed to keep environmental damage to a minimum.
It uses minimal energy and resources. Always act with regard to the environment at
your place of work. Please note the following disposal information.
Disposal:
– Always dispose of unusable or irreparable safety laser scanners in accordance
with national waste disposal regulations.
– Remove the plastic components from the safety laser scanner. Now send the
aluminium housing of the safety laser scanner for recycling.
– Dispose of all electronic assemblies as special waste. The electronic assemblies
of the safety laser scanner are easy to disassemble.
239
04.19 en-GB