Jungheinrich EFX 410, Operating Instructions Manual

Page: 272 / 404

To reach the required height there are various operating modes depending on
the parameter setting
Z
The following operating methods to reach the required height should only be
adjusted by the manufacturer's specialist customer service personnel who have
been trained to do this.
To approach the required height manually
(
t
):
The "Hydraulic functions" control lever (113)
must be pressed and held down until the
required height has been reached (automatic
stop).
Z
The lift and lower speeds are in proportion to
the movement of the "Hydraulic functions"
control lever (113).
Z
The warehouse location approach can be cancelled by pressing the “CE” button on
the numerical keypad or by pressing the EMERGENCY DISCONNECT switch.
112 113 120 20 119
270
04.19 en-GB